How to deal with the leakage of CNC spring machine?

I think many users of spring machine have encountered electric leakage. How should we deal with this situation? Let's take a look with Alliance Wire now.
The voltage of CNC spring machines is mostly below 60 volts, and those above 60 volts are abnormal and need to be handled properly.
1. Use an ordinary wire to connect the machine to the domestic iron water pipe. If the power supply has a ground wire, connect the ground wire of the machine power supply. connect. If the measured voltage is 200 volts to 220 volts, it means that the wire skin of the machine is damaged. First, check whether the wiring of each fan is damaged, and then check whether the wire from the machine to the corner of the controller is damaged. If not, use the elimination method to check.
2. If the voltage measurement is above 60 volts and below 150 volts and there is a power trip, there may be a series of electricity, especially the possibility of occurrence of small 8 machines. It is recommended to connect the spring machine to ordinary life electricity to solve the problem.