How to repair the wire feeding frame of the wire forming machine?

The wire forming machine is an automation equipment often used in the processing industry. The wire feeding frame is the core working part of the wire forming machine. It is related to the automatic conveying and processing of the wire forming machine. How to solve the failure of the wire feeding frame of the wire forming machine?
Wire Forming Machine
Once the wire feeding frame of the wire forming machine fails, it will inevitably affect the effect and efficiency of the processing quality, and it needs to be resolved in time:
1. When the wire forming machine is started, the work light of the wire feeder does not display information, and there is no alarm, you need to check whether the power switch of the wire feeder is in the closed state, whether the switching power supply is powered, and the working voltage is It is not at the required operating voltage value, and whether the fuse tube is damaged;
2. After confirming that the wire feeding frame of the wire forming machine is powered on, but the wire feeding frame does not rotate, check whether the wire feeding frame motor can run, remove the transmission belt and test the motor, and check whether the soft starter has an alarm. If there is no alarm, the soft starter must be replaced immediately;
3. When the wire feeding frame of the wire forming machine does not play the role of synchronous wire feeding, check whether the relay in the wire frame circuit board is burned out. If the working light of the relay is always on, it means that there is a problem and need to be replaced;
4. When turning the switch of the wire forming machine, check that the words "common faults of the wire rack" do not appear on the information frequency. If there is any need to check whether the support rods in the toggle switch box are in contact with the induction switches on both sides If not, adjust to touch or replace the sensor switch.
The above are the more common failures of the wire feeding frame of the wire forming machine. The failure of the wire feeding frame must be solved in time, otherwise it will affect the normal processing and production of the enterprise. If it is difficult to deal with and cannot be solved, please contact the manufacturer for assistance. WF-535R 0.3-2.5mm 4-6 axis CNC cam wire rotating wire forming machine is your good choice.