Maintenance skills of wire forming machine

The long-term and high-efficiency operation of a mechanical equipment is inseparable from regular maintenance
WF-1020 0.2-2.0mm 10-12 axis camless CNC wire forming machine is your good choice.　　 
1. Correct installation and placement:
After the wire forming machine is placed in the workshop, it needs to be fully grounded. During the transportation process, the manufacturer needs to remove the wooden board and put the rubber pad on it. The purpose of this is to prevent the machine from being in the production process. Vibration will occur due to the operation of the machine.
2, add oil and butter regularly:
The places for refueling are mainly in places such as crimping, wire feed box, and transmission gears. Keep the running-in part of the mechanical part lubricated with organic oil for a long time. Generally, the butter should be checked once a week;
3. Keep the wire forming machine clean:
Before leaving get off work every day, employees need to wipe the machine surface clean. If it is not cleaned for a long time and oil stains accumulate, there will be the possibility of changes in circuit parameters, as well as long-term erosion of dust, which will make the machine surface aging and affect its appearance;
4. Normal operation and use:
Special attention should be paid not to produce products that exceed the wire diameter range as much as possible, so as not to reduce the accuracy of the equipment. The wire forming machine needs to be placed in a ventilated and dry place to prevent moisture, rust, or damage to the circuit .WF-1020 0.2-2.0mm 10-12 axis camless CNC wire forming machine is your good choice.