Servo Hydraulic Ring Coil Machine

Servo Hydraulic Ring Coil Machine

Specification of Wire Chamfering Machines​

Model	RF-M6	RF-M10
Wire diameter range	2-6mm	4--10mm
Outer diameter	25-500mm	25-1000mm
speed	30m/min	30m/min
Motor Power	2.2	5.5
volume	1550*850*1300	2050*1000*1450
weight	500	820
feed roller groups	2	3
Straightening bearing number	14	14

Details of Wire Chamfering Machines​

Feature of Wire Chamfering Machines​

Automatic Wire Ring Forming Machine is mainly used for bending the metal wire or metal strip into full circle,semicircle or any angle and any length concentric arcs.

As to the special wire and strip with non-circular cross section,only need to change the feeding roller,adjustable roller,pressing roller,and the cutter.Widely used in various of hardware manufacturing industry.

The fully Automatic CNC Ring Making Machine combines the advantages of Japan, Europe and Taiwan relative equipment,have high production rate,high precision,simple operation,energy saving,low production cost.

The whole process is finished automatically, can also be equipped with hole-punching function.

Scope of Application

Applicable to:shape(including round,square and flat)processing of iron wire,steel wire,stainless steel wire,nonferrous metal wire and other wires,and also processing of single circle,double circles(or extension spring),flat circle and open circle(intended)circle.This machine is one of the special equipment in hardware and iron wire)industry.

※ This machine is the latest design model in 2012, which brings together the best of Japan, Taiwan and domestic products. Its compact, reasonable structure, small size, low noise and beautiful appearance.

※ This machine has the function of withdrawing the wire, and it can rewind the coil when debugging, which greatly avoids the waste of wire.

※ Advanced, stable, fast, accurate, power saving, high degree of automation and easy operation.

1.Hydraulic power drive, hydraulic pushing and cutting, hydraulic part: using Danish oil motor and the rest using Taiwan hydraulic components. Electrical part

More than 90% use imported electrical components. The key parts are rolling bearings made in Switzerland and Japan.

2, digital display program control (using Japanese encoder, preset counting controller): fixed length (circle diameter circumference), high accuracy.

3. The control box is equipped with: fast wire feeding, slow wire feeding, cutting, automatic, manual, wire withdrawal, etc., with complete functions and simple operation.

4. Adopting two-stage counting control, which can be modified at any time, and the stop and slow control distances are optimized to make the wire length (perimeter) control accuracy and work efficiency high.

5. The decimal point of the number control magnification, the length data unit is directly displayed in mm (millimeter), the counting accuracy is 0.1mm, the data can be displayed intuitively, and the operation and control are convenient.

6. The line speed is up to 30-35 meters / minute, which is more than 15% of the output of similar domestic models.

7. Due to the use of full hydraulic drive and hydraulic cut-off, this machine only needs a 2.2KW motor and oil motor to drive the wire. Compared with domestic similar machines, it can save more than 30% of electricity.

8.Electronic-hydraulic control is provided with automatic unloading. When the machine is adjusted and when no operation is performed, the hydraulic pressure is automatically unloaded, which greatly reduces energy consumption and reduces the pressure time of hydraulic components, which is beneficial to extend its service life.

Sample