What should I do if the CNC wire bending machine has abnormal noise?

What should I do if the CNC wire bending machine has abnormal noise?

Your old friend ALLIANCE WIRE FORMING TECH CO., today I would like to introduce to you what to do if the CNC wire bending machine has abnormal noise.
Our WB-2D206S 2.0-6.0mm 2 axis 2D CNC wire bending machine series products have become a model and benchmark in the industry, and buyers from all over the world are welcome to wholesale and purchase!
CNC wire bending machines are mainly used for bending and forming of metal wires, and are currently widely used in various industries, such as the production of springs, baskets, etc. In the long-term use of mechanical equipment, failure problems will inevitably occur. So, what should I do if the CNC wire bending machine has abnormal noise?
There are two main situations in which abnormal noise occurs in the CNC wire bending machine:
1. Machine precision problem
Carefully distinguish whether it is the gear noise or the sharp sound from the tail of the motor when the motor is running, and check whether the wire bending machine has loose parts. If conditions permit, you can also check whether there is a gap between the gears. Generally, just loosen the motor fixing screw when adjusting. Just tighten the motor a little bit;
2. Drive parameter problem
The accuracy of the motor is operated by hand. When adjusting, just adjust the value to a moderate value, and do not blindly pursue the mute effect and affect the accuracy.
The above are the reasons and solutions for the abnormal noise of the CNC wire bending machine. I hope all operators will read and understand carefully to prevent you from encountering the same problems in the future. If you have other problems about machine maintenance that cannot be solved, Welcome to consult Yonglian CNC.