How to ensure the daily efficient operation of the computer spring machine

ALLIANCE WIRE FORMING TECH tells you how to ensure the daily efficient operation of the computer spring machine. Our SC-808 0.1-1.00 CNC 8 axis spring coiling machine product is your perfect choice!
The computer spring machine is an organic combination composed of the computer control system and the forming part of the spring machine. It can drive the operation of the mechanical part through the computer end carrying the information instructions, so as to achieve synchronous operation and asynchronous execution trajectory. Computer spring machines will not be unfamiliar to everyone, so how to ensure the daily efficient operation of computer spring machines?

①When starting up, strictly follow the operation steps and instructions. The computer spring machine must carry out various inspection and debugging operations before leaving the factory. The user must check the fasteners to be mobilized when debugging the machine before use, so as to avoid the collision phenomenon caused by loosening, falling or shifting during the production process. Causes damage to the mechanical part of the spring machine.

②In the long-term shutdown state, try to loosen the wire feeder wheel as much as possible. Because the wire feeding pulley of the spring machine is under the action of long-term compression, it will cause damage to the bearing or slight deformation of the wire feeding pulley, which will cause the wire feeding accuracy to be unstable when it is turned on and used later. In addition, if the belt line is pressed for too long, the diameter of the wire may be deformed, and the next time it is turned on and used, it will cause the blockage of the wire of the different wire board or the mandrel, which will affect the precision of its firmware.
③The technical master should try his best to supervise the debugging process of the technicians. When the apprentice is adjusting the machine, the master should try to be on the scene to reduce or avoid unnecessary accidents. In addition, after the apprentice has debugged the product, the master must check it.

④When the machine is running, it is forbidden to touch the working panel of the spring machine. During the operation of the computer spring machine, it is forbidden for us to touch the panel of the spring machine with our hands, so as to prevent the operation of the machine components from causing damage to us.

⑤To control the falling direction of processed products. The free fall of the spring machine product must be controlled in a good direction, otherwise the tool seat and other components will be stuck, causing unnecessary knife or machine collision.

⑥When trimming the product, be sure to stop the machine. In the daily work of the CNC spring machine, if the product is found to be abnormal, it must be stopped before adjustment and correction can be made to avoid accidents.

⑦When the computer spring machine fails, please ask professionals to overhaul it. When the spring machine is damaged or faulty, it should be checked and corrected by experienced or professional personnel; when repairing, it should be repaired by relevant professionals. It is strictly forbidden to disassemble without professional and technical personnel to avoid secondary damage.