Which industries are metal wire bending machines mainly used in？

Metal wire bending machine is mainly used in auto parts industry, metal products industry, home industry.The wire bending machine is turned on by the computer, the shutdown speed is simple and convenient, the forming stability is high, and the speed is fast. Computer program design greatly improves the production quantity and quality.

There are some introductions about the wire bending machine:

1. The forming area of the wire bending machine is controlled by two high-power servo motors and six low-power servo motors respectively, wire feeding, folding angle, cutter, lifting, turning core, turning line, tray, eccentric core, matching gear slide rail transmission.

2. The angle shaft of the wire bending machine is driven by the servo motor to drive the reduction gear to ensure accurate positioning, 360° bending rotation, and fast speed;

3. The cutter shaft of the wire bending machine is driven by a servo motor driven gear to push the small bumps. The principle of lever is used to cut the wire, the torsional shear force is large, and the large and small lines are universal. The speed is more convenient than the industry, the hydraulic and pneumatic method, and the failure rate is low;

4. The lifting shaft of the wire bending machine is driven by the servo to ensure accurate positioning, so as to achieve the replacement of the bending direction during forming;

5. The tray shaft of the wire bending machine is driven by the servo drive guide rail to assist the high-demand flat products and assist the solid angle;

6. The core shaft of the wire bending machine is driven by a servo gear to rotate the shaft core. It is more convenient and simple to replace the R angle and adjust the R angle.

7.The eccentric shaft of the wire bending machine drives the screw eccentrically on the left and right through the servo to make the small R angle and the auxiliary effect of the small wire position product;

8. The wire bending machine rotates the spool, and drives the belt gear to rotate in the direction of the servo, which can be rotated by plus or minus 180° to ensure the two and three-dimensional molding effect.